MyVans Your Vehicle Solution
It can be frustrating to have a dead battery in your Ford Fusion, but it can be even more frustrating when you need to move the car and can’t put it in neutral. In this article, we will discuss step-by-step instructions on how to put a Ford Fusion in neutral with a dead battery.
Step 1: Locate Shift Interlock Override
The first step is to locate the shift interlock override, which is a small slot located next to the gear shift lever. You will need a small flathead screwdriver or a key to insert into the slot.
Step 2: Insert Screwdriver or Key
Insert the screwdriver or key into the slot and push down. You should feel a slight resistance before the key or screwdriver goes in fully.
Step 3: Press Brake Pedal
While still holding down the key or screwdriver, press down on the brake pedal with your foot. This step is important because it allows the car to shift gears.
Step 4: Shift to Neutral
Now that the brake pedal is pressed down, you can shift the car to neutral. Simply move the gear shift lever to the neutral position.
Step 5: Remove Screwdriver or Key
Once the car is in neutral, you can remove the key or screwdriver from the shift interlock override slot.
Step 6: Start the Car
Now that the car is in neutral, you can start the car. Once the car is running, you can shift to the desired gear.
Step 7: Disconnect Battery Cables
If you plan on leaving the car for an extended period, you may want to disconnect the battery cables to avoid draining the battery. To do this, locate the negative and positive terminals and use a wrench to loosen the clamps. Remember to disconnect the negative cable first and reconnect it last.
By following these simple steps, you can easily put your Ford Fusion in neutral with a dead battery. This can be a lifesaver in situations where you need to move the car, but the battery is dead.
People Also Ask:
Can I push my Ford Fusion if the battery is dead?
Yes, you can push the car if it has a manual transmission. However, if it has an automatic transmission, you will need to follow the steps outlined in this article to put the car in neutral.
Why won’t my Ford Fusion start even with a jump?
If your Ford Fusion won’t start even with a jump, the problem may not be the battery. It could be a faulty alternator, starter, or ignition switch. It’s best to have a mechanic diagnose and fix the problem.
How do I jumpstart my Ford Fusion?
To jumpstart your Ford Fusion, you will need a set of jumper cables and another car with a charged battery. Follow these steps: connect the positive cable to the positive terminal on the dead battery, then connect the other end of the positive cable to the positive terminal on the charged battery. Next, connect the negative cable to the negative terminal on the charged battery, then connect the other end of the negative cable to a metal surface on the dead car, such as a bolt or bracket. Start the charged car and let it run for a few minutes, then try to start the dead car.
