MyVans Your Vehicle Solution
When it comes to lifting a truck, there are a few things you need to consider. One of the most important things is measuring the lift. In this article, we’ll show you how to measure a lift on a truck.
Step 1: Know the Types of Lifts
Before you can measure the lift on your truck, you need to know the type of lift you have. There are two main types of lifts: suspension lifts and body lifts. Suspension lifts raise the entire truck by replacing or modifying the suspension system. Body lifts, on the other hand, only raise the body of the truck off the frame.
Step 2: Determine the Lift Size
Once you know the type of lift you have, you can determine the lift size. To do this, you need to measure from the ground to the highest point of the truck. This could be the top of the tire, the top of the fender, or the top of the roof, depending on the type of lift you have.
Step 3: Measure the Tires
Another way to determine the lift size is to measure the tires. This is especially useful if you have a suspension lift. To do this, measure the height of the tire from the ground to the top of the tread. Then, subtract the height of the tire when it was stock. This will give you the lift size.
Step 4: Check the Manufacturer’s Specs
If you’re unsure about the lift size, you can check the manufacturer’s specs. This information should be available in the owner’s manual or on the manufacturer’s website. Keep in mind that the lift size may vary depending on the make and model of your truck.
Step 5: Use a Tape Measure
If you don’t have access to the manufacturer’s specs, you can use a tape measure to measure the lift size. This method is not as accurate as the other methods, but it can give you a rough estimate. To do this, measure from the ground to the top of the truck.
Step 6: Measure the Distance Between the Axles
Another way to measure the lift on your truck is to measure the distance between the axles. To do this, measure from the center of the front axle to the center of the rear axle. Then, subtract the distance between the axles when the truck was stock. This will give you the lift size.
Step 7: Check the Suspension System
Finally, you can check the suspension system to determine the lift size. This method is only applicable for suspension lifts. To do this, look at the suspension system and see how much it has been modified or replaced. The more modifications, the higher the lift size.
Conclusion
Measuring the lift on your truck is important if you want to make sure your truck is safe and legal. By following the steps outlined in this article, you can determine the lift size and make any necessary adjustments. Remember to always check with your local laws and regulations before modifying your truck.
People Also Ask
How can I measure the lift on my truck without a tape measure?
If you don’t have a tape measure, you can use a ruler, yardstick, or any other measuring tool. You can also estimate the lift size by comparing your truck to other trucks with known lift sizes.
Is it legal to lift a truck?
The legality of lifting a truck varies from state to state. Some states have strict regulations on lift sizes, while others have no regulations at all. It’s important to check with your local laws and regulations before lifting your truck.
What are the benefits of lifting a truck?
Lifting a truck can provide more ground clearance, better off-road performance, and a more aggressive look. However, it can also reduce fuel efficiency, increase tire wear, and make the truck more difficult to handle on the road.
