MyVans Your Vehicle Solution
Speedometer is an essential part of your motorcycle, as it tells you how fast you are going. However, like any other part of your bike, it can malfunction, and that can be dangerous. If you are facing issues with your speedometer, here’s a complete guide on how to fix it.
Step 1: Diagnose the Problem
The first step to fixing your speedometer is to diagnose the problem. There are several reasons why your speedometer might not be working correctly. It could be a faulty speed sensor, a broken cable, or a blown fuse. You need to identify the issue before you can fix it.
Step 2: Check the Speed Sensor
The speed sensor is responsible for sending signals to the speedometer. If it is faulty, your speedometer will not work correctly. To check the speed sensor, you need to locate it on your bike. It is usually located on the front or rear wheel. Once you find it, check if it is clean and free of debris. If it is dirty, clean it with a soft cloth. If it is damaged, you need to replace it.
Step 3: Inspect the Cable
The speedometer cable connects the speedometer to the speed sensor. If it is broken or damaged, your speedometer will not work. To inspect the cable, follow it from the speedometer to the speed sensor. Check for any cracks or damage. If you find any, you need to replace the cable.
Step 4: Check the Fuse
If your speedometer is not working at all, there could be an issue with the fuse. Check the fuse box and locate the fuse for the speedometer. If it is blown, you need to replace it. Make sure to use the correct amperage fuse.
Step 5: Replace the Speedometer
If none of the above steps have worked, you need to replace the speedometer. Before you do this, make sure you have checked everything else. You don’t want to spend money on a new speedometer only to find out that the issue was with the sensor or the cable.
Step 6: Test the Speedometer
Once you have fixed or replaced the speedometer, it’s time to test it. Take your bike for a ride and check if the speedometer is working correctly. If it is still not working, you need to go back and check everything again.
Preventive Measures
Prevention is always better than cure. To avoid issues with your speedometer, make sure to keep your bike clean and well-maintained. Regularly check the speed sensor and the cable for any damage. Also, make sure to use the correct fuse for your bike.
Conclusion
Fixing a speedometer is not a difficult task, but it requires patience and attention to detail. Follow the steps mentioned above, and you should be able to fix your speedometer without any issues. Remember to take preventive measures to avoid any issues in the future.
