MyVans Your Vehicle Solution
One of the most frustrating things that can happen to your car is when the interior door handle stops working. This can happen for a variety of reasons, but the good news is that it’s usually an easy fix that you can do yourself. In this article, we’ll walk you through the steps you need to take to fix your interior car door handle.
Determine the Problem
The first step in fixing your interior car door handle is to determine what the problem is. In some cases, the handle may be loose or broken, while in others, the locking mechanism may be damaged. Once you’ve identified the problem, you can move on to fixing it.
Remove the Door Panel
To access the interior workings of your car door, you’ll need to remove the door panel. This is usually held in place by a series of screws or clips, which you can remove using a flathead screwdriver or a trim removal tool.
Locate the Door Handle Mechanism
Once you’ve removed the door panel, you should be able to locate the door handle mechanism. This will likely be a small metal or plastic piece that connects the handle to the locking mechanism. If this is loose or broken, you may need to replace it.
Replace the Door Handle Mechanism
If the door handle mechanism is damaged, you’ll need to replace it. You can usually find replacement parts at your local auto parts store or online. Simply remove the old mechanism and replace it with the new one, being careful to reattach any wires or cables that may be connected to it.
Check the Locking Mechanism
If the door handle mechanism is not the problem, you may need to check the locking mechanism itself. This is usually a small metal piece that connects to the door latch. If this is damaged or worn out, you may need to replace it.
Replace the Locking Mechanism
If the locking mechanism is damaged, you’ll need to replace it. This can be a bit more complicated than replacing the door handle mechanism, as it may require removing additional components. However, with a little patience and some basic tools, you should be able to get it done.
Reinstall the Door Panel
Once you’ve fixed the problem, it’s time to reinstall the door panel. Simply line it up with the door frame and reattach any screws or clips that you removed earlier.
Test the Door Handle
Before you call it a day, make sure to test the door handle to make sure it’s working properly. If everything is working as it should, you’re good to go!
