How to Fix Cigarette Burns in Your Car

2 Views

Smoking is not only bad for your health, but it can also cause damage to your car. Cigarette burns on your car’s upholstery can be unsightly and decrease the value of your vehicle. If you have cigarette burns in your car, don’t worry, you can fix them yourself. In this article, we will show you how to fix cigarette burns in your car.

Fast Read : show

Materials Needed

Before you start fixing your car’s cigarette burns, you’ll need to gather some materials. Here’s what you’ll need:

Scissors
Tweezers
Super glue
Leather or vinyl repair kit

Step 1: Cut off the Burnt Fibers

Use a pair of scissors to cut off the burnt fibers around the cigarette burn. Make sure to cut only the burnt fibers, not the undamaged fibers. This will make the repair process easier.

Step 2: Use Tweezers to Pull Out the Burnt Fibers

Use tweezers to pull out any burnt fibers that are still stuck to the fabric. Be careful not to pull out any undamaged fibers. This step will ensure that the repair will be smooth and even.

Step 3: Apply Super Glue to the Burnt Area

Apply a small amount of super glue to the burnt area. This will help to stabilize the area and prevent it from further damage. Be careful not to use too much glue as it can cause discoloration.

Step 4: Fill the Burnt Area with the Repair Compound

Fill the burnt area with the repair compound from the leather or vinyl repair kit. Make sure to follow the instructions on the kit carefully. Spread the compound evenly and smooth out any bumps or lumps.

Step 5: Let the Compound Dry

Let the compound dry completely. This may take several hours, depending on the type of compound you used. Make sure to avoid sitting or putting any pressure on the repaired area while it’s still drying.

Step 6: Sand the Repaired Area

Use sandpaper to smooth out any bumps or lumps on the repaired area. Make sure to sand it gently and evenly to avoid damaging the undamaged fibers. This will make the repair look more natural and seamless.

Step 7: Apply the Colorant

Apply the colorant from the repair kit to the repaired area. This will help to match the color of the repaired area with the rest of the upholstery. Make sure to follow the instructions on the kit carefully and apply the colorant evenly.

Step 8: Let the Colorant Dry

Let the colorant dry completely. This may take several hours, depending on the type of colorant you used. Make sure to avoid sitting or putting any pressure on the repaired area while it’s still drying.

Step 9: Apply the Finish

Apply the finish from the repair kit to the repaired area. This will help to protect the repaired area from further damage and make it look more natural. Make sure to follow the instructions on the kit carefully and apply the finish evenly.

Step 10: Enjoy Your Newly Repaired Car Upholstery

Once the finish has dried, your car’s cigarette burn should be repaired and look like new. Congratulations! You have successfully fixed the cigarette burn in your car.